Large white formica/particle board table (Amherst)

This table is made of one-inch thick particle board covered in white formica. It is approximately 25 years old but in good condition. Has been disassembled and stored for the past 15 years. There is minor damage where the pieces were glued together and pulled apart, easily repaired by re-glueing when it is reassembled. None of the damage would show once re-assembled. The top is 5' 4" (64 inches) wide, and 26.5 inches front to back. The height is 29 inches. It has knee space for sitting along the full width of the front, but not on the ends which are supported by solid particle-board panels, and not on the rear where there is a support panel below the top that braces against the end panels. Thus it is suitable as a desk or work table but not as a dining table where chairs would need to be placed on all sides. It is plain white, very simple design. There are no drawers. It is HEAVY being thick particle board. PIck up in South Amherst with a vehicle capable of carrying the top which is long and heavy (see dimensions above). Photo of disassembled table, and sketch of assembly: https://www.flickr.com/gp/8707702@N08/18k9i0
This post has expired!

Browse more recent posts »

       
Posted by
Approximate Location