DIY folding queen bed (or lumber) (Scarborough (Manse Road))

Standard Queen size (60" wide by 80" long). Folds into a box of the size shown for transport, all slats can be stored inside. Solid wood, very heavy - I can help you carry it out to a pickup or van. Some of the slats have broken ends, but can be repaired with a single screw each and some glue. I was stupid and used brad nails to hold the dovetails in originally. I don't have any pictures of it assembled unfortunately, but the mattress sits about 12-18" off the ground so it's a fairly low bed.

Can also be taken apart for lumber. Built from 1x12 clear pine (at least 20 board feet), has 3 coats of varnish but can be planed or sanded down. Included are ~20 five-foot 1" x 3" slats which can just be used for projects (e.g. shelving) as is.

Also includes 8 6" strap hinges, and two AC and USB combo outlets ready to mount in a wall box.

This is easily $150+ worth of wood and hardware, first person to show up with a vehicle gets it. I'm home most weekends, and can arrange to be home on a weekday morning if you need.
Interested in this offer?
To reply to this post, please log in or sign up.
   
   
Posted by
Approximate Location