A Members' Posts

Free: 4 Plastic Fuel Jerry Cans (Livingston Mtn., Camas) Promised Three 5 gallon jerry cans with spouts (one can not shown but same as others). One 1 gallon jerry can. The spouts are a bit banged up but don’t leak upright or pouring. There may be small leaks if left on their sides for some time. In stores, cost is about 25$ for a 5 gallon can and $15 - $20 for a 1 gallon.

+2 +1

75d

Free: V2 veneer press (Livingston Mtn., Camas) Expired Ordered parts from and built according to veneersupplies dot com (Joe). Used twice and worked like a charm. Had to take a period of R&R and sadly will not be getting back into that hobby. Works with vinyl/other veneer bags up to approx. 3’ x 5’. Unable to find bag yet but relatively easy to make but if found, will let go with the V2. I do have the bag sealer which is included. Available to first committed inquiry but will need to wait until on or after 08/25 to pick up/test. If you have a veneer bag already, you’re more than welcome to bring it and test. Won’t be disappointed.

+4 +3 +2

91d

Free: 3 Plastic Fuel Jerry Cans (Livingston Mtn., Camas) Expired Two 5 gallon jerry cans. One 1 gallon jerry can. The spouts are a bit banged up but don’t leak upright or pouring. There may be small leaks if left on their sides for some time. In stores, cost is about 25$ for a 5 gallon can and $15 - $20 for a 1 gallon.

+2 +1

112d

Free: Heavy-duty caster wheels (Livingston Mtn., Camas) Expired Never been used. Set of 4 and set of 6 heavy-duty castor wheels. All are 360 degree freely-rotating. The set of 4 has 2 7/16” x 2 x 13/16” bases. Wheels are 3” in diameter. 2 of these larger castors lock. The set of 6 has 1 7/8” x 2 1/16” bases and 2” diameter wheels. One of these caster wheels locks.

+2 +1

117d

Free: Veneer - Quarter-sawn White Oak (Livingston Mtn., Camas) Expired 4 x 8 sheet. 4 x 6.5 useable due to crack in bottom left of first photo. Backed without glue. Nice quarter-sawn pattern.

118d