Frame for Bungo bouncy chair, ball-bouncing toy, or frame for bean bag or air-blown cushion. The diameter of area with the holes 27”. The outside diameter is 31”. The round frame has an adjustable angle. Its height is 22” when parallel to the ground. The pieces of cord in the center were removed, except for the cord attached to the holes. Four pieces of cord plus the small center metal ring are shown. It was manufactured as a camping bouncy bungee chair, but the stretchy elastic bungee cords were not in good enough condition for that use. It could be rewoven with new elastic cord to be used as a ball-bouncing toy or a bouncy chair. It could be used as a frame for a large beanbag or air-blown lawn-patio chair. It could also be used as a drying rack, with hangers hung on the cord sections. Or to wrap a trash bag around and collect leaves. A piece of elastic fabric or mesh could be tied or hooked onto the sections of the cord to create another toy for bouncing sandbags or balls. You could use a round piece of canvas or stretchy fabric whose size matches the inner diameter of the purple canvas ring and then tying the round piece to the holes in the frame to the round piece. The frame, canvas, and holes are in excellent condition and clean. No scratches or rust.
Near building 1075 Valencia Avenue in Sunnyvale, off South Mary Avenue and behind the Crosswalk Church. Please include your available pick up time in your response and I will send you directions.
Interested in this offer?
To reply to this post, please log in or sign up.
Approximate Location
Show marker