90cm Range Cooker Hood (Skerton LA1)

This is a Belling CHIM90 Cooker Hood about 15 years old but the 'farmhouse' design hasn't changed much. Was working last week when removed. 90 cms wide; 49cms deep. Comes with plug for a standard 3 pin socket. Three grease filters (dishwashable). Three fan speeds and two lights at rear. Pushbutton switches on front edge. The vent is 120mm to attach to an external venting kit if needed. It will do internal recirculation but requires additional charcoal filters. There is a short (23cms high) section of original chimney cowl (see left of photos) available and separately I have an unused 40cms section of black cowl that is slightly narrower but could potentially be combined. Straightforward to fit. Original "Installation and User's instructions" booklet with it. NOTE: 1) This will need a thorough clean and degrease. I have done the front but not the sides or the inside. Suggest bringing some newspaper or similar to protect your car when picking it up. 2) The motor is quite powerful and consequently quite noisy on the most powerful speed setting.