South Brent, Ivybridge & Totnes Free
Join South Brent, Ivybridge & Totnes Free
to give and get free furniture, household items, books, food, baby stuff, clothes and more.
Or
find your local community.
Join
Join
List Layout
Photo List Layout
Cards Layout
within
Free:
Ikea Table Top (Missing Legs). (Lipson PL4)
Ikea Table Top it's missing the legs but I imagine it would be possible to install some new ones or could just use some sawhorses. Relatively lightweight but feels fairly solid (note it's not solid wood). The labels have peeled off and I can't remember what the table was called. It has some cosmetic damage but not loads. Dimensions: Length 120cm Width 60cm Thickness 3.5cm Collection from PL4 Greenbank.
+3
+2
+1
+1
+2
+1
+2
+1
Free:
Electric convection heater (Milber TQ12)
Challenge DL06.
+1
+2
+1
+5
+4
+3
+5
+4
+3
+3
+2
+1
+5
+4
+3
1h
Free:
Glass topped round outdoor table. (Steer Park PL7)
Approximately 44 inches in diameter, some age related damage but otherwise in reasonable condition and ready to use.
4h
Request:
flat Policarbonate offcut (Totnes/Paignton TQ4)
Looking for multilayer flat Policarbonate sheeting or part of, building an animal shelter
4h
Request:
Concrete flags (Steer Park PL7)
Used / unwanted paving slabs
5h
Free:
Galvanised Mop Bucket (East Exeter.)
Mop bucket with a fitment in which the mop is squeezed.
9h
Free:
Cat Food Bella Pate x 5 (Stoke PL2)
Because my cat doesn't like it
10h
Free:
Desk 80cmx120cm (Copythorne TQ5)
Good condition
12h
Free:
Waterproof bathroom wall panel (Torquay TQ1)
2400x1200mm Multipanel Calacata Marble Bathroom Wall Panel. Purchased these panels for a bathroom renovation but this one was unused in the end. Also have an off cut approx 2400 x 600mm.
13h
Free:
stainless steel cutlery set (Milber TQ12)
Approximately 46 items. There are also two honing rods available, but they're rusty and would need cleaning - please specify if you want these. The original wooden box is available, if you wish, but it's broken and the inside padding is very grubby and has physically deteriorated.
13h
Free:
Desktop air purifier (Milber TQ12)
BAP600 model
14h
Free:
TV dinner beanbag surface (Milber TQ12)
Clean, but the top surface has marks.
14h
Request:
Futon (Hartley PL3)
Preferably a double!! I love the wooden ones, I’m moving out in less than a month and would love a futon sofa/bed. It would be a great sofa so I don’t have to eat dinner in my bed :). Preferably to be available around the 19/10
15h
Free:
Lockable rigid red suitcase (Milber TQ12)
16h
Request:
Toaster and/or Air Fryer (PL11 2BN)
If anyone has a toaster or air fryer they no longer need or use, I would very much appreciate either. Thanks 😊
16h
Free:
Tennis Racket (old) (Milber TQ12)
Wooden racket, bought in the eighties or maybe seventies?
16h
Free:
Clockwork/solar "Trevor Baylis" radio (Milber TQ12)
You'll need to fix a couple of things: • the wind-up mechanism works, but can be noisy. Just needs oiling? • the tuning dial is stuck
18h
Free:
Slide projectors (pl21 0ag)
2 projectors with all necessary to operate them
20h
Free:
Electric reclining chair (South Brent)
Biscuit colour recliner in very good condition
1d
1d
Free:
Dimplex 3071 electric radiator (Milber TQ12)
Missing plug - you will need to fit one yourself.
1d
Free:
Rigid lockable Echolac suitcase (Milber TQ12)
Probably at least thirty years old.
1d
Free:
Corner Glass Display Cabinet (PL4 Greenbank.)
Dimensions: Height 187cm Width 64cm Depth 40cm I've got a corner display cabinet with a glass door, glass shelves, mirrors and and internal light hough it will need to be re-wired as the lead has been cut at some point prior to me acquiring it. Something to note there is a single light fixture but the reflection in the mirrors makes it look like there are three in the photos. It has some chips to the woodwork and small chip to the corner of one of the glass shelves (see photos). The door has dropped slightly I've tried adjusting the hinges multiple times but I can't seem to get it quite right so this may need some additional adjustment. It is very heavy and will require multiple people, two at the very least to load/unload it in and out of a vehicle as well as when assembling it. It comes in two sections which sit on top of each other, in order to place the two sections together you will need at least two people one or two to lift the top section and another to help guide it down into place, there is a series of dowels which allow it to slot together. For it to be transported I would suggest that the glass shelves as well as the glass in the door be removed to avoid any damage to them, removing the glass from the door and replacing it is fairly straightforward and can show you how to do it if needed when you collect it. Collection from PL4 Greenbank.
1d
Free:
Corner Glass Display Cabinet. (Lipson PL4)
Dimensions: Height 187cm Width 64cm Depth 40cm I've got a corner display cabinet with a glass door, glass shelves, mirrors and and internal light hough it will need to be re-wired as the lead has been cut at some point prior to me acquiring it. Something to note there is a single light fixture but the reflection in the mirrors makes it look like there are three in the photos. It has some chips to the woodwork and small chip to the corner of one of the glass shelves (see photos). The door has dropped slightly I've tried adjusting the hinges multiple times but I can't seem to get it quite right so this may need some additional adjustment. It is very heavy and will require multiple people, two at the very least to load/unload it in and out of a vehicle as well as when assembling it. It comes in two sections which sit on top of each other, in order to place the two sections together you will need at least two people one or two to lift the top section and another to help guide it down into place, there is a series of dowels which allow it to slot together. For it to be transported I would suggest that the glass shelves as well as the glass in the door be removed to avoid any damage to them, removing the glass from the door and replacing it is fairly straightforward and can show you how to do it if needed when you collect it. Collection from PL4 Greenbank.
1d
Free:
Knitted Humpty Dumpty/Clowns (Saint James Ward EX4)
Old hand knitted toys. A few marks and one Clown moth eaten. A few marks on Humpty Dumpty, may come out if washed ?
1d
Free:
Indoors TV antenna booster ta46ss10 (Milber TQ12)
Designed for caravans, boats, motor homes. Comes with its own plug for mains use, or accepts 12V.
1d
Free:
Black Glass and Chrome TV Table (Plymstock, PL9)
TV table in good condition. Has three shelves for media devices and has free flowing lockable castors for easy movement. Made from tempered safety glass to BS6202A standard. Chrome uprights with two rear cable ducts to conceal cables. It's a sturdy piece of furniture suitable for a large TV. Measures 1100mm wide x 400mm deep x 570mm high (43.5” x 15.5” x 22.5”). Collection only from Plymstock, Plymouth.
1d
Free:
Swan Red microwave (Paignton TQ4)
Red microwave
1d
Free:
Indesit washing machine (Paignton TQ4)
Washing machine 1400 spin 9k Working order
1d
Free:
Artists lamp (Heavitree EX2)
Promised
Heavy duty and large artists lamp Natural daylight, as you can see the lamp vs daylight in the pictures. This would make it great for painting or other creative hobbies where you want to see colours accurately. I no longer use it because it is too large for my current desk. It fits 3 light tubes inside but only had 2 at the moment. Collection is flexible so suggest some times that work for you.
1d
Request:
Vinyl Records (Buckland TQ12)
Ill take any records from nee to old but would prefer newer ones
1d