Free stuff near Pelynt, England
Join the Pelynt, England
community to give and get free furniture, household items, books, food, baby stuff, clothes and more.
Or
find your local community.
Join
Join
List Layout
Photo List Layout
Cards Layout
within
Free:
Chair (PL4)
I'll be taking the chair to the rubbish tip next week, but wanted to see if anyone could make use of it before I do. It has a broken backrest and is also off balance, however it is still perfectly usable if you're willing to take a couple steps to make it work. I've had the backrest placed up against a wall, which supports it, so with it like this the chair is still perfectly usable. There seems to be an issue with one of the feet which causes the chair to wobble. I can't work out what is wrong with it as I've measured them and they're all the same length, so I've just been putting padding under the foot to correct this. Dimensions: Height 85cm Sitting height 46cm Armrest width 67cm (at the widest point) Cushion 47cm x 44cm Collection only from PL4 Greenbank.
+3
+2
+1
+4
+3
+2
+1
+5
+4
+3
+5
+4
+3
+1
Free:
Short scuba hoses x2 (Probus)
These have been in storage for a while, one appears to have a little corrosion, I'm not sure if any good still, but hoping someone may be able to make use of them?
+5
+4
+3
+3
+2
+1
+1
+2
+1
+4
+3
+2
12h
Free:
Acer Extensa 5230E (St Austell PL25)
Has Windows 7 Home Premium installed, 2gb RAM, 160GB Hard Drive, 2.2gh Celeron CPU and DVD re-writer. Works well except keyboard has a problem so you have to plug in an external one.
12h
Free:
2 door wardrobes, solid wood (Yeolmbridge PL15)
2 medium sized solid pine wardrobes which fit together to make one large wardrobe if enough space available. Width/ Depth/Height in mm 820 x 560 x 1750 Plus 1750 20 mm spacing batten to space correctly for use as large wardrobe. Could do with a sandwich and seal, but still absolutely sound Contents will be removed prior to pick up (not sure where to!)
14h
Request:
Clothes airer (PL26)
Requesting a clothes airer please
20h
Request:
4" tumble dryer ducting (PL26)
Hoping someone might have some left over tumble dryer ducting 4"?
20h
Request:
Electric blanket (PL26)
On the off chance someone has an old one they've upgraded from etc hoping to find an electric blanket please
20h
Free:
Mirror (Carlyon Bay PL26)
1.34m x 1.09m Holes 40mm in each corner for fixings Was in our bathroom. Some discolouration to one edge as seen in photos
1d
Request:
Christmas Tree (PL1)
I would like a Christmas tree for a charity organisation I work with. Our old one is broken beyond repair sadily and we've no budget for a new one this year. I dont drive but can try to collect depending on location, as I live in the city centre. Much appreciated
2d
Free:
Two Metal Bed Frame Bases. (PL4)
- Need gone asap. - I've got two metal bedframe bases the part where the slats and mattress would go on. I got them with the intention of using them for a structure I was helping to build but we ended up using pallets instead. They have been stored outside so they have some rust on them. I've numbered them 1, 2 on the photos so you'll know which information corresponds to which one. 1. This is the larger of the two frames this one can be dismantled. Dimensions: 198cm x 150cm / Corner to corner 236cm 2. This one is rigid so can't be dismantled feels sold and strong. Dimensions: 186cm x 121cm / Corner to corner 211cm If they can go together that would be great but they can go separately if need be. For collection due to there size you will need a vehicle with either a suitable sized boot or a roof rack. Collection only from PL4 Greenbank.
2d
Free:
Dresser & Mirror Set - Refurbishment Project (PL4)
Need gone by Thursday morning (20th) otherwise I will regrettably have to take it to the rubbish tip. Dresser and mirror set in need of restoration. It needs a general clean up, a new coat of paint, the paintwork is cracking at various points, the mirror will need attaching down somehow as it won't stand up very stable by itself also the mirror doesn't seem to want to stay level so may need to attach some sort of counter weight to it. Dresser Top part 81cm x 40.5cm Height 80cm / Including mirror 157cm Mirror by itself 76.5cm x 65.5cm x 14cm Collection only from PL4 8.
2d
Free:
Dresser & Mirror Set (Needs TLC) (PL4 Greenbank.)
- Need gone by Thursday morning (20th) otherwise I will regrettably have to take it to the rubbish tip. - Dresser and mirror set in need of restoration. It needs a general clean up, a new coat of paint, the paintwork is cracking at various points, the mirror will need attaching down somehow as it won't stand up very stable by itself also the mirror doesn't seem to want to stay level so may need to attach some sort of counter weight to it. Dresser Top part 81cm x 40.5cm Height 80cm / Including mirror 157cm Mirror by itself 76.5cm x 65.5cm x 14cm Collection only from PL4 8.
2d
Free:
Cot Repair Project (PL4)
- Need gone asap thanks. - Tutti Bambini Ravenna Cot Bed. I've got a cot I picked up for free a while ago which needed some repairs, the main issue is that one of the end panels has a large hole in it. My plan was to replace the broken part but I no longer have the space to store it while I work on it so I wanted to see if anyone else was interested in taking it on as it seems a shame to throw it away when the rest of the cot is fine. I believe the end panels are made of laminated MDF. I've added some additional slates to the mattress base. Dimensions: Length 144cm Height 95cm Width 75cm Underneath space height 14.9cm Product information: This cot can be used at three base height positions as well as a toddler sized bed by removing the two side rails and removing and reducing the height of the headboard and footboard so it's able to grow with your child. It takes a 140cm x 70cm mattress, I don't have a mattress for it. Collection from PL4 Greenbank.
2d
Free:
Two Metal Bed Frame Bases (PL4 Greenbank.)
- Need gone asap. - I've got two metal bedframe bases the part where the slats and mattress would go on. I got them with the intention of using them for a structure I was helping to build but we ended up using pallets instead. They have been stored outside so they have some rust on them. I've numbered them 1, 2 on the photos so you'll know which information corresponds to which one. 1. This is the larger of the two frames this one can be dismantled. Dimensions: 198cm x 150cm / Corner to corner 236cm 2. This one is rigid so can't be dismantled feels sold and strong. Dimensions: 186cm x 121cm / Corner to corner 211cm If they can go together that would be great but they can go separately if need be. For collection due to there size you will need a vehicle with either a suitable sized boot or a roof rack. Collection only from PL4 Greenbank.
2d
Free:
Enviroseal (Truro TR1)
New, unopened, no longer needed - can you use it?
2d
Free:
Mortar plasticiser (Truro TR1)
New, unopened, no longer needed - can you use it?
2d
Request:
Sawdust (PL4)
For making briquettes
3d
Free:
Plastic weight belt clip & grip (Probus)
Can anyone make use of these weight belt clips for scuba diving or snorkelling?
3d
Free:
Scuba cylinder mesh (Probus)
Can anyone make use of this? It fitted a dumpy cylinder I think!
3d
3d
Free:
Aqua Lung pressure gauge & compass (Probus)
This has been in storage for a while, I'm not sure if any good still, but hoping someone may be able to make use of it?
3d
Free:
Chair (PL4 Greenbank.)
- I'll be taking the chair to the rubbish tip next week but wanted to see if anyone could make use of it before I do. - I've got this chair which has a broken backrest and is also off balance however it is still perfectly usable if your willing to take a couple steps to make it work. I've had the backrest placed up against a wall which supports the backrest so with it like this the chair is still perfectly usable. There seems to be an issue with one of the feet which causes the chair to be wobble I can't work out what is wrong with it as I've measured them and they're all the same length, so I've just been out paddling under to foot to correct this. Dimensions: Height 85cm Sitting height 46cm Armrest width 67cm (at the widest point) Cushion 47cm x 44cm Collection only from PL4 Greenbank.
3d
Free:
4 pallets (Minions)
4 pallets, clean and dry stored. Collection only
3d
Free:
Plastic floats - beachcombing finds (Probus)
Hi! Can anyone make use of these? I've collected them but now realised I have no use for them, duh! I'll be so glad if anyone would like them! =) Katie
3d
Free:
Scuba torch ? working? (Probus)
Hi! Can anyone make use of this Ocean Pro underwater torch for scuba diving? It's been in storage for ages, I tried charging it up & when plugged in it still wasn't working (though the light was on on the plug) so maybe it needs a new bulb? Or possibly it's broken, but if anyone may be able to make use of it in spite of this I'd be very glad! =) Katie
3d
Free:
Stainless steel jubilee bands (Probus)
Hi! Can anyone make use of 2x large (110-140mm) stainless steel jubilee bands, previously used on a Scuba cylinder? I'll be so glad for them to go to a good home! =) Katie
3d
Free:
Strimmer. (Carlyon Bay PL25)
Strimmer. Quite old and needs a connector. But I'm sure someone could make use of it.
4d
Request:
Offcuts of Loft Boards (PL5)
Offcuts of loft boards 6 ft long approx (20 sheets ) I want them for a project I'm doing
4d
Free:
Photo frame 20 x 16” (par)
Photo frame 20 x16” as photo,free to collect from par
4d
Free:
Insulated expanded polystyrene box. (Carlyon Bay PL25)
White expanded polystyrene box. 55cm x 38cm x20cm. Useful for holding frozen food while defrosting the freezer or fishing.
4d
Request:
Chicken wire offcuts (Carlyon Bay PL25)
Chicken wire offcuts needed to prevent squirrels digging up my tulip bulbs from my pots. Bought some posh tulips for a bit of spring colour and the squirrels have had them. Need to protect my pots before planting more!
4d