Bath taps (Penn HP10)

Hi

These bath taps are looking for a new home if somebody can make use of them. They have conventional tap washer and not ceramic disc cartridges.

The bodies are 3/4 inch and have never been used but the knobs are from a similar pair that were used for some years. One of the tap cartridges is very stiff / nearly seized, but can be freed with a little tlc or the cartridge replaced (£6 for the part). Some of the clips on the cap of the cold tap knob have broken (bottom left of photo) but the cap can be held in place with a dab of silicon between it and the screw underneath.
This post has expired!

Browse other posts »

       
Approximate Location         Show marker