This is a small double bed size 54" x 73" (137 x 186 cm. It was mis-sold to us second hand as a king size, but we only discovered this after having had it dismantled and delivered, and later retrieving the mattress, which we had loaned out. The bed is not big enough for us.

We don’t have documentation but believe it to be a Contemporary style Murphy Bed from Wall Bed Furniture as here: http://www.wallbedfurniture.com/style but note that it a bed unit and single wardrobe. (Photos are from the web site).

Please be clear that this will be a challenge to both transport and build, so you need to be a keen DIY’er. At least two people will be needed. There are instructions online here: http://www.wallbedfurniture.com/_files/ugd/1b01a7_66820e02836b44789ec3f4577... and an installation video here: http://www.wallbedfurniture.com/diy-instructions.

The bed has been fully dismantled and has numerous heavy pieces up to around 2.1m long and 0.6m wide. Together with the mattress it ideally needs a van to transport, or be prepared for more than one trip. The bed is generally in good condition except that the screw connecting the two halves of the leg connector rod has sheared and will need to be replaced or welded. The bed has been stored in the garage for a couple of years so you may wish to replace the mattress.

Though this has been a bad buy for us it would be great if there is someone out there with the skills to make use of it, rather than it going to the tip.

Double Wall Bed (Downley HP13)