A Members' Posts

Free: Holly trunk for woodworking, lathe? (Highbury N5) It seems a pity to just chop this up and burn it or leave it to rot. Apparently holly wood turns very well on a lathe and it carves beautifully. It's currently green so would need to be seasoned for a year or so. It's heavy, very dense. It's 6ft long and about 60mm in diameter at the bottom. Neither shed nor gate included. Pick up from N5 1UP - Highbury Fields area. I'm in during the week days and evenings but not at weekends.

35d

Free: Whoop Fitness Tracker Battery (Highbury N5) Expired Found in Highbury area, I'd like to reunite it with owner. It did charge and the light turned green but after a couple of days was red again (when tapped,) I'm not sure if this is normal or whether the battery is past its best. No holding, no weekends,

110d

Request: 2 Wheelchair front wheels (Highbury N5) Expired My next project is an old wicker shopping basket (pictured but not on offer) that I've received and that is missing its wheels. I'm looking for a pair of wheels ideally with bearings, I thought the front wheels from a wheelchair would be ideal. I can make a new axle and or bearings so that part isn't really important. Many thanks!

+1

113d

Request: Espresso Machine (Highbury N5) Expired Do you have one that doesn't turn on, leaks or refuses to pump water out of the top bit? I'd like to fix it and save it from landfill. Unfortunately I can't repair Bean to Cup machines: too complicated, or machines that use pods. Thanks very much!

126d

Free: Found Fitness Tracker Battery (Highbury N5) Expired Found in Highbury area, I'd like to reunite it with owner as it has data on it presumably. If you think it's yours please tell me the colour, make and model, and likely location where you dropped it.

126d

Request: Espresso Machine (Highbury N5) Expired Do you have one that doesn't turn on, leaks or doesn't pump properly? I'd like to fix it and save it from landfill. Unfortunately I can't repair Bean to Cup machines: too complicated, or machines that use pods.

141d

Request: Black & Decker 14.4V Battery charge (Highbury N5) Expired Hi, I've been given a Black and Decker "EPC14" 14.4V cordless drill by another Trash Nothinger. It has the "A14E" battery but not the charger. I was wondering if someone somewhere had a charger. Perhaps you had the same drill and the battery/drill died leaving the charger without a purpose in life! There are two types apparently: the type of charger that plugs into the drill or the cradle type. See photos , plug-in type has a 5.5mm diameter jack. Prepared to travel. Many thanks.

+1

148d

Request: Faulty Espresso Machine (Highbury N5) Expired Do you have one that doesn't turn on, leaks or doesn't pump properly? I'd like to fix it and save it from landfill.

186d

Request: A garden parasol base (Highbury N5) Received I've rescued a garden parasol from being chucked away but now I need a base for it. I can make adaptors for the stick part so the size of the hole doesn't matter. I'd be happy with any kind i.e water-filled or just heavy!

230d

Request: Any type of lawn sprinkler (Highbury N5) Expired I thought I'd ask before buying one: I'm having a bit of turf laid next week and thought someone might have an unused one sitting in the shed.

302d

Request: Old type of electric kettle lead (Highbury N5) Expired Hello, I'm looking for a power lead for a 1960s kettle which has been kindly given to me by a neighbour. Perhaps you have one in a drawer somewhere or the attic. They can be rewired so if yours has a damaged cable I could fix it. The end that goes into the kettle is 33mm in diameter and the power pins are 18mm apart. Apparently no-one makes them anymore - but if you know otherwise please let me know!

323d

Request: Old type of electric kettle lead (Highbury N5) Expired Hello, I'm looking for a power lead for a 1960s Russel Hobbs K2 kettle which has been kindly given to me by a neighbour. Perhaps you have one in a drawer somewhere or the attic. They can be rewired so if yours has a damaged cable I could fix it. The end that goes into the kettle is 33mm in diameter and the power pins are 18mm apart. Apparently no-one makes them anymore - but if you know otherwise please let me know!

351d

Request: Metal sieve (Highbury N5) Expired Before I spend a whole quid on buying one (shudder)...has anyone out there got a one they don't want? I'll be using it for sieving fibres for model-making so it doesn't need to be food-safe. Ideally metal so that it can be statically charged to make grass flocking.......but plastic would be fine too. I can pick up whenever suits you as I am now a man of leisure. Ta very much!

1y

Request: Rotary pencil sharpener (Highbury N5) Expired I do a lot of doodling and am forever needing to sharpen my pencils. The little sharpeners always seem to break the leads as do penknives. I've been told the old-fashioned type with the crank handle are much better. With that in mind, has anyone got one they don't need anymore? It doesn't have to have the fixing clamp - easy enough to make, and I could probably fix a problematic one. I'm very flexible with pick-up times and days and would be eternally grateful.

1y

Request: "School" type pencil sharpener (Highbury N5) Expired I do a lot of doodling and am forever needing to sharpen my pencils. The little sharpeners always seem to break the leads as do penknives. I've been told the old-fashioned type with the crank handle are much better. With that in mind, has anyone got one they don't need anymore? It doesn't have to have the fixing clamp - easy enough to make, and I could probably fix a problematic one. I'm very flexible with pick-up times and days and would be eternally grateful.

1y

Free: Playmobil Helicopter 'City Action' (Highbury N5) Gifted Set #5563 You may have seen this on Trash Nothing earlier. It was listed as needing repair as the pin that holds the rotor blades on was missing. I've made a new one out of steel and lightly glued it in with non-toxic glue. The blades spin freely now (with a little wind power!): Be aware that it's missing a few parts: the pilot's visor and the lamp that is slung under the fuselage, so not ideal for collectors. It comes with the assembly leaflet thingy which has the numbers of the parts so you could buy the missing stuff from ebay. Also, despite the photo it does not fly, yet. Pick up from Highbury Fields area. I'm in most weekdays and evenings, but away at weekends. Please be polite, punctual and communicative. Don't say you want it & then ghost me.

+1

1y

Request: A garden compost bin in Highbury (Highbury N5) Expired I've been piling up kitchen waste and shredded newspapers and grass cuttings in a foetid heap in the garden under a tarp and nothing is happening! I'd like to try a proper compost bin, I'm in Highbury but I don't have anything other than 2-wheeled transport so it needs to be local. Many thanks!

1y

Request: A small amount of gloss black paint (Highbury N5) Expired I'm fixing up an old Dutch (actually Finnish) bicycle, I need enough gloss black to paint one mudguard. It can be absolutely anything so long as it's shiny and black! Many thanks!

1y

Free: Motorcycle fairing screen (Highbury N5) Expired Yet another thing from the back of the shed. I put it on my BMW and it worked well but I missed the wind blast so here it is. As you can see it comes with some brackets but you'd need to fabricate or buy some more to secure it fully. The round cut-out is 210mm in diameter. The space between the lower brackets' mounting holes is 205mm. Total height is about 400mm, width 385mm. Thickness of plastic is just over 4mm - sturdy. It has a few marks but nothing really major. One of the black metal discs on the front is rusting under the paint. Fixing bolts appear to be stainless. Not cheap to buy new and they do quite well on eBay if you wanted to sell it on. Pick up is in N5 1UP - Highbury Terrace. I'm at home most weekdays but I like a lie-in so have rarely surfaced before 10am. Please consider carefully if you want it or not before asking for it. I expect prompt, polite and communicative messages.

+4 +3 +2

1y

Free: Bicycle rear rack (Islington N5) Expired Surplus to requirements, aluminium so light and rust-free (apart from adjustment nuts and bolts.) Needs a dust/wipe over as has been in a shed. See photos for dimensions, as you can see there are slots to facilitate fitment. Pick up from N5 1UP, weekdays only. In your FIRST message tell me when you can pick up from Highbury Fields/Highbury Terrace area. Failure to pick up on time will result in it going into the recycling bin.

+3 +2 +1

1y

Request: A 26" bicycle inner tube (1 3/8") (Islington N5) Expired My bicycle's inner tube valve has ripped out through old age. I have a puncture repair kit but it can't re-attach the valve! Has anyone got one lying around somewhere? It doesn't matter if it's got a leak as I can repair it. Thanks!

1y

Request: A pizza stone (Islington N5) Expired I'm learning how to make pizzas but can't seem to get the undersides crispy enough. Has anyone got a pizza stone - the sort that goes in the oven ? Cheers!

1y

Request: A piece of tube or pipe 75mm OD (Islington N5) Expired I have rescued a leaf blower from a skip and fixed it up. All it needs is a tube to direct the air. Ideally, a piece of PVC drainpipe or even a cardboard tube - it needs to have an outside diameter of 75mm - (3" ish). Length anything 50cm / 2ft or longer. Alternatively if you know of a skip where guttering and drainpipes are being disposed of I'd love to know where. Thanks very much.

1y

Request: A broken leaf-blower (Islington N5) Expired I need to clear my garden and prep my lawn for winter. If you have any kind of leaf-blower: petrol or electric; working or faulty I'd give it a good home. Many thanks!

1y

Request: A broken leaf blower (Islington N5) Expired My back yard's about to be deluged with not only the leaves from my own tree but the neighbours' too. I'm looking for any kind of leaf blower: petrol or electric, working or not - I'm pretty good at fixing things! Cheers!

1y

Request: A leaf blower (Islington N5) Expired My back yard's about to be deluged with not only the leaves from my own tree but the neighbours' too. I'm looking for any kind of leaf blower: petrol or electric, working or not - I'm pretty good at fixing things! Cheers!

1y

Free: Sony PS3 - DOESN'T WORK (Islington N5) Gifted Spares or Repairs only. No cables, no controllers, no games. Pick up only. Stopped working many years ago, has been in a very dry cupboard ever since. Pick up from N5 1UP weekdays only. We're in an LTN, so check a map if you're driving.

+3 +2 +1

1y

Request: A roof slate in Highbury or nearby (Islington N5) Received I would like to make a shopping reminder thingy that I can write on with chalk. I'm planning on making a wooden frame for it Thanks!

1y

Request: Garden hose (Islington N5) Received Any length of hose over 6ft long is what I am in search of. It'd be great if there were push-on connectors too but not essential. I've been kindly given a Karcher pressure washer that needs attention and the first thing I need to do is get water into it. I'm in the Highbury area btw. Thanks very much.

1y