A Members' Posts
List Layout
Photo List Layout
Cards Layout
Free:
Chest of drawers (Winton, BH3)
Ideal for refurb/upcycling


+1



+1



+3
+2
+1



+2
+1

16h
Free:
Full height fridge freezer (Winton, BH3)
White. Dented on one side (see pictures) but doesn't affect operation.



1d
Free:
IKEA gateleg dining set (Winton, BH3)
Gateleg table and 4 chairs (which don't fold). Table incorporates 6 wooden drawers. A bit faded in places but good quality materials

1d
Free:
Tall bookcase (Winton, BH3)
Light brown, fair condition. Adjustable shelves

1d
Free:
Wicker chair (Winton, BH3)
Single seater wicker chair.

1d
Free:
Gloss acrylic wall panel (Southbourne BH6)
Gifted
One gloss blue acrylic wall panel, originally 2400x1200, has a 3" slice off one side, partway up resulting in a small crack.
1y
Free:
Bathroom sink and cupboard (Southbourne BH6)
Expired
Bathroom sink, on shiny finished MDF cupboard, removed from our bathroom. No plumbing or fittings. Doors and shelf removed for ease of carrying, all will fit back in easily. 56cm wide.


1y
Free:
3-4mm wall panel fittings (Southbourne BH6)
Expired
Collection of extrusions for 3mm or 4mm wall panels. Available: "H" straight joints, inner & outer corners and end caps variously in white plastic and shiny aluminium. Take one, some or all (ideally all!).

1y
Free:
White alu trim for 11mm wall panels (Southbourne BH6)
Expired
Outside corner edge strip for 11mm wall panels. One complete 2400mm piece, one 1130mm offcut with 45° angled end. White painted aluminium.
1y
Free:
Alu strips for 11mm wall panels (Southbourne BH6)
Expired
Aluminium "H" joint strip plus 2 endcaps for 11mm wall panels. 2400mm length. Brand new, over ordered.



1y
Free:
PVC windowsill offcut (Southbourne BH6)
Gifted
1184mm x 185mm (plus rolled overhang) white PVC Windowsill offcut. Top surface still with factory protection.




1y
Free:
Acrylic wall panels (Southbourne BH6)
Gifted
I have 3 wall panels, two 3mm thick, in a matt light blue and one 4mm thick in a glossier blue. One of the light blue ones is uncut 8ftx4ft (2440mm x 1220mm), the second started out that size has had 3" inch or so cuts from top and one edge and a couple of holes drilled in it. The gloss one, originally 2400x1200, also has a 3" slice off one side, partway up resulting in a small crack. Any takers before I take them to the tip?




1y