IMPORTANT: Only available for collection. Read details to check if the item would suit you and could be safely carried or put inside your vehicle, on your roof rack or in your trailer.
If interested, please state preferred days and times to collect. Failure to collect on mutually agreed day may result in the item being promised to another Freegler.
DETAILS:
A water butt stand made by UK maker Sankey that had been of use until our big water butt split! So now have two small water butts with their own stands so this is surplus.

It's black. The dimensions on it state that it's 21 inches by 12 inches (or 53cm by 30cm). The height of 30cm it means that the tap on the butt should be high enough off the ground that you'd be able to put a watering can under it. The diameter of 53cm is that of the base of the stand, NOT the diameter of the top of it.

The top of the stand is designed with "steps" so that a variety of sizes of butt can sit snugly on it.

The diameter of the innermost top section is 38cm - a butt with a base diameter of 37 to 38cm should sit nicely here.
The diameter of the next section is roughly 43cm - a butt with a base diameter over 38cm, up to 43cm should here.
The top section, before the outer rim, is 43 to 46cm - a butt with base diameter over 43cm up to 46cm goes here.

It has been kept outside but is in a solid and pretty clean condition and is not brittle or cracked.

It should suit most standard water butts of 120 litres up to 250 litres BUT do check that the diameter of the very bottom of your butt/barrel is no more than 46cm and no less than 37cm or it won't fit well on this base.

If your water butt/water barrel stand is looking a bit sad or cracked now, maybe this could be good for you.

Happy for someone to come here and take this way. Better for it to be used than discarded.

If you're looking for compost bins please look at my other listing.

Sankey Water Butt Water Barrel Stand (Clarkston G76)