Raised Bed build your own parts - Link-a-Bord (Clarkston G76)

To give everyone a chance of getting to see this, the earliest I'll make a decision on who this will go to will be on Friday 25th April after 8pm.

These are for collection only from Clarkston in East Renfrewshire, and I'm looking for all of the items in this post to go to one freegler. Do read all the details to be sure these will suit you.

In registering your interest please indicate what days and times, from Saturday 26th April onwards, you'd plan to uplift from here.

Best for someone with an allotment or a large garden, or for someone to share out to fellow allotment plot holders. Can make several raised planters with these from 15cm tall to 45cm tall. 50cm square, 100cm square, 100cm by 50cm and various other options available with the range of components listed.

These are Link-a-Bord components, designed to create raised beds from 15cm to 45cm high.
See the website - https://www.linkabord.co.uk/
They have been unused from new and have been kept in a shed for some years. About 4 of the 100cm boards are slightly bowed but could still form roughly a 1m square by 15cm high planter. The remaining 1m and 50cm boards could be used to create taller or longer planters - for long and high raised planters Link-a-Bord do suggest using a stretcher kit (that's basically two sets of board connectors with an extra hole in that a bracing rod is attached to and link pins put in place). corner and straight links are required to connect each board and two long dowels drive through all the way into the ground. See the website for instructions.

The parts consist of:
18 x green 100cm long by 15cm high boards (4 of these slightly bowed)
6 x green 50cm long by 15cm high boards
20 x green corner links
12 x straight links
14 x straight links with hole to connect bracing rod and pin - can still be used as a regular straight link if required.
20 x 100cm dowels (cream and black)
14 x 45 to 50cm dowels (cream and black)
20 x 30cm dowels (cream)
5 x 50cm width bracing rods
2 x 100cm bracing rods
14 x bracing pins (12 with caps) - basically very short dowels.