Wooden coat stand about 6ft tall when assembled.
The topmost part turns independently of the rest so you can get to things at the back without turning the whole thing.
It needs repair, so only ask if you’re interested in a restoration project.
There are two things needed:
1. The lower section has split where the legs fit in. This could probably be fixed with some careful glueing. You might have to separate the broken parts to glue them together properly.
2. The upper section should screw into the bottom, but the metal threaded insert from the bottom bit is missing. It should be possible to obtain a suitable internally threaded part, or devise an alternative.
Collect from Chorlton M21
Coat stand - for restoration (Chorlton M21)
To reply to this post, please log in or sign up.