These need a really good clean up (I have hosed them down to get the worst of the muck off), but there are still sticky labels, bits of paint etc. Note that they are probably only suitable for stacking because someone has cut vertical slots in either left or right hand front corner as shown in the second photo and this might result in them cracking if they are hung from storage bin louvre panel without being fully supported beneath. I suspect this was maybe to get them onto sheving with metal angle uprights. Dimensions roughly as follows:
Internal - 16 inch wide x 10 inch deep x 5 inch height, with a roughly 3 inch height opening when stacked
External - 18 inch wide x 12 inch deep
There are no divider panels.
Located near LIDL in Knaresborough.
9x large stacking storage bins for shed/garage/workshop (Knaresborough HG5)
To reply to this post, please log in or sign up.