Weather Seal Strip P-Profile.
Some of it has been used so there is less than what it says in the box.
Description:
Weather-tight seal protects doors and windows Strip is designed to keep the heat in and cold out Seals small gaps from approx. 2/25 - 2/10 in. (2 - 5 mm)
Helps conserve energy
Dimension approx: 394 in., 2 x 197 in. (10 m, 2 x 5 m)
For best results, ensure surfaces are completely dry and free of dust, grime or grease.
Installation: Separate the strips and unwind approximately 12 in. (30.48 cm) to start.
Remove backing paper and press adhesive side of tape firmly onto window or door frame. Cut excess with scissors or razor.
Windows: Apply on upper and lower window sashes between window and window sill.
Doors: Apply to door stop molding across the top and down hinge side. Apply to inside of door across top and down latch side.
Collection from PL4 Greenbank.
Weather Seal Strip P-Profile. (Lipson PL4)
To reply to this post, please log in or sign up.