A Members' Posts
List Layout
Photo List Layout
Cards Layout
Request:
M4 x 15mm Jack Nuts / Spyder Split Body Rivet Nuts (PL4)
Hello, I'm in need of a single or possibly a couple of M4 x 15mm, or shorter, Jack nuts. I've also seen them listed under various names, including Spyder split body rivet nuts. If anyone has any they're happy to let me have, I would be most grateful. I'm in the PL4 Greenbank area and can travel a certain distance to collect them if needed. Thanks.



+3
+2
+1



+2
+1



+3
+2
+1



+2
+1




+5
+4
+3


+1




+2
+1



+1
Free:
Double Ply Banana Boxes (PL4)
Withdrawn
Need gone asap otherwise will take to tip. Double ply banana boxes. These are rigid so can't be flat packed and they don't have lids so can't be sealed. They're fairly strong and have cutouts to make it easier to carry them. Currently have six but may get more. Collection from PL4 Greenbank.





+3
+2
+1



+1


+1




+5
+4
+3


+1

1d
Free:
Set of 6 Dining Chairs (PL4)
Set of 6 dining chairs. There is also a glass topped table which goes with the chairs but I still need to assemble it, once I've done that I'll update the post. Need gone asap. These chairs have marks and a couple rips in the fabric as well as some rust on the bottom of the feet. Collect only from PL4 Greenbank.




1d
Free:
Banana Boxes With Lids (PL4)
Gifted
Will be taking them to the tip on Monday. Banana boxes with lids the bottom box is double ply and the lids are single. 10 boxes available. Collection from PL4 Greenbank.

1d
Request:
Keyed SDS Chuck Adapter (PL4)
Hello does anyone have a Keyed SDS Chuck Adapter and key they no longer need like the type shown in the provided image? I've got a keyless chuck adapter but for some reason the bit I was using kept coming loose like the chuck was coming undone. I'm in the PL4 Greenbank area I can travel a certain distance to collect if needed. Thanks.

2d
Free:
Galvanised Incinerator Bin 80ltr (PL4)
Withdrawn
Ideally needs collecting asap. Galvanised incinerator bin 80ltr. I based the capacity on the dimensions of other bins I saw listed online. Important: Due to the various points of rust on the bin I've read online it's not advisable to use the bin with fire due to the heat potentially causing it to let out fumes so please take this into consideration when deciding what your going to use it for. It could have other uses. Approximate dimensions: Height 57cm (without lid) / 70cm (with lid) Width Top 42cm / Bottom 37cm It dosen't have any legs but there are holes on the bottom where you could fit your own (see photos). Collection only from PL4 Greenbank.




2d
Free:
Fireplace Surround For Electric Fire (PL4)
- Need gone asap. - Fireplace surround for electric fire / heater (see last imagine for example). It has some cosmetic wear and tear (see photos). Dimensions: Width 120cm Height 101.5cm Depth 12cm / Top part 15.5cm Opening where the electric fire would go: Height 58cm Width 41cm Collection from PL4 Greenbank.




2d
Free:
Garden Table & Chairs Set (PL4)
Withdrawn
- Need gone asap. - Garden Table and two chair set in need of some TLC. The chairs are not in amazing condition but are still usable the table has a a bit of a wobble to it they will also probably all need a re-paint. The coat that is currently on them is coming off so it may be necessary to remove that coat beforehand. Collection from PL4 Greenbank.




2d
Request:
SDS Pointed Chisel Bit (PL4)
Withdrawn
Does anyone have an SDS Pointed Chisel Bit that they no longer need and would be willing to let me have? I recently just bought a rotary hammer drill but it didn't come with any bits so I wanted to test the drill out before committing to purchasing a full bit set. I'm requesting a pointed chisel bit specifically as I would be using the bit to break up some concrete. I have previously used a Titan rotary hammer drill with a pointed chisel bit so that's what I've had experience with. I will add a photo showing the concrete I would be using the bit against when I have time later today. Thanks. I'm in the PL4 Greenbank area I can travel a certain distance to collect if needed.

3d
Request:
Stairgate Replacement Latch Parts (PL4)
Hello I've got a BabyDan stair gate but it's missing the top and bottom latch parts. If anyone has any of these which they no longer need and are happy to let me have I'd be most appreciative. I can come to collect the parts if needed. Thank you. I'm located in PL4 Greenbank.


4d
Free:
Vintage Wooden Chair with Cushion (PL4)
Withdrawn
Vintage wooden chair with cushion. I don't know what era this is from. This is a nice looking chair which at some point prior to when I acquired it someone has started re-painting it but it looks like they didn't end up finishing the job. Could be good for someone looking for a restoration project. Collection from PL4 Greenbank.




4d
Request:
Feet for Plastic Shelving Unit (PL4)
I bought a set of plastic shelving units like the type shown in the provided image, but I need four additional feet to use them the way I'd like to have them set up. The dimensions of the feet I need are: Height 9cm Thickness/circumference 3.4cm I'm not sure about compatibly between products as the design of the feet on some other brands of shelves look different. If anyone has got any they no longer need which look the same or something like the ones I've got, please message me. I'm in the PL4 Greenbank area and can travel a certain distance to collect if needed. Thanks.



4d
Free:
Banana Boxes, Double & Single Ply (PL4)
Withdrawn
If not gone before the end of the week they will be broken down and recycled. Banana boxes. Currently we have 9 boxes but we get more most days so that amount will increase. The single ply boxes when turned upside down can be used as lids for the double boxes. Collection from PL4 Greenbank.


9d
Free:
Headboard - Repairs Or Spares (PL4)
Withdrawn
Headboard I found it could possibly be repaired or the wood could possibly be made use of in other ways. As it's been left outside it has been rained on and is wet so I'm currently in the process of drying it out. Dimensions: Height 117.5cm Width 102cm Collection from PL4 Greenbank.




9d
Free:
Useful Box With Carry Handle (PL4)
Useful box with carry handle. Approximate dimensions: Length 63cm Height 50cm Width 14cm Collection from PL4 Greenbank.


14d
Free:
Large Piece of Cardboard (PL4)
Withdrawn
- Ideally need gone asap as taking up a lot of space. - Large piece of cardboard. It has one of two parts which got wet but I'm currently drying it out. I was thinking it could be useful if someone needs some for use on an allotment as a weed blocker. Approximate dimensions: 230cm x 214cm Collection from PL4 Greenbank.

18d
Free:
Large box - No Bottom Part (PL4)
Withdrawn
I've got a large box which has a top but no bottom so cannot be fully sealed however it could be used as a lid to cover something or if turned upside down it could be used to put/store stuff in. Approximate internal dimensions: Height 82cm 64cm x 50cm Collection from PL4 Greenbank.



19d
Request:
Single Metal Pin For Ikea Chair (PL4)
Received
Hello I have an IKEA chair which I got for free, it was missing most of the fixings which I've now replaced but it's still missing a single metal pin like shown in the provided photo. The dimensions are: Length 50mm Thickness 0.8mm (M8) If someone had one of these they willing to let me have I would be most grateful for it as I am unable to use the chair without it. Thank you. I'm in the PL4 Greenbank area.

19d
Free:
Kitchen Bin (PL4)
Withdrawn
Kitchen bin. Has been cleaned recently. Collection from PL4 Greenbank.

20d


21d
Free:
Essential Indian Cookbook (PL4)
Essential Indian cookbook: Step-by-step recipes with style. Collection from PL4 Greenbank.

23d
Free:
Stationary Workout Bike For Components/Parts (PL4)
I've got a stationary workout bike which is not usable it's missing key parts such as the seat, pedals and armrests however I thought someone might possibly be able to make use of the components by stripping it for parts. I wanted to remove the plastic casing so I could take a photo of the inside but in order to do this it's first necessary to remove the crank arms and despite removing the nuts holding them in place they won't come off. It's got a bit of weight to it so I would suggest either coming by vehicle or if you're walking bringing some sort of sack truck to transport it. Collection only from PL4 Greenbank.


27d
Free:
Green Kitchen Bin (PL4)
Withdrawn
Green kitchen bin. Has been cleaned recently. Collection from PL4 Greenbank.

28d
Free:
Black Kitchen Bin (PL4)
Expired
Black kitchen bin. Has been cleaned recently. Collection from PL4 Greenbank.

28d
Free:
Pair of Lightweight Wooden Chairs (PL4)
Expired
I've got a pair of lightweight wooden chairs. They both have some noticeable cosmetic wear and tear (see photos) if you don't care about aesthetics these chairs are perfectly functional. Collection from PL4 Greenbank.




29d
Free:
Kitchen Bins. (PL4)
Expired
I've got three kitchen bins, I don't know what their capacities are, one of them is missing it's lid. The green one has been cleaned, still got to clean the black ones. Collection from PL4 Greenbank.


30d
Free:
Dog Crate Tray 42" (PL4)
Expired
DogDog Crate Tray in 42" size. It has a small crack in it which I've covered up with tape it shouldn't affect it's usability. Dimensions: Length 106cm 42" Width 69cm Thickness 2.5cm Collection from PL4 Greenbank..



31d
Free:
Two Very Large Cardboard Boxes (PL4)
Expired
I've got two very large cardboard boxes if anyone is interested in them. The dimensions are: External: Length 168cm Height 96cm Width 21cm Internal: Length 166cm Height 94cm Width 19cm Collection only from PL4 Greenbank.



31d
Free:
Metal Chair Frame (PL4)
Expired
Metal Chair Frame (Cushion need re-attaching).. The cushions have come off I was going to try and re-attach them or I considered trying to add my own seat and backrest but I don't have the time now so thought I'd see if anyone else wanted to have a go before I take it to the tip. Collection only from PL4 Greenbank.


31d
Free:
Chest Of Drawers (see description). (PL4)
Expired
Chest Of Drawers. Dimensions: Width 104.5cm Height 87cm Depth 50cm / including handles 53.5cm Draws Width 89cm Depth 38.5cm Height 14cm Quite heavy. This would be a really nice solid chest of drawers if someone knows how to fix the issue with it. There's an issue with the the drawers when pulling them out or pushing them in there's resistance so they don't come out smoothly. I tried removing a drawer from the rails and some ball barring fell on the floor I picked up the ones I could find but some are still missing. It appeared that some of the ball bearings were already missing which might be why there's an issue pulling them out/in. Due having nowhere to store this inside I've had to leave it outside although it's under multiple tarpaulins some water has affected the very top part (see photos). If someone who knows how to fix the issue wants these drawers let me know. Collection only from PL4 Greenbank.




32d
Free:
Ikea SNILLE Swivel Chairs - Missing Seats (PL4)
Expired
- Will be taking them to the rubbish tip within the next couple days but thought I would first see if anyone can make use if them. - I've got two Ikea SNILLE Swivel Chairs unfortunately they're missing the actual seat part and as this model has been discontinued getting replacements is not easy however it may be possible to add your own seat part to it. I was going to have a go myself by just attaching a piece of wood and a cushion but I'm sure there's someone out there who could come with a more elegant idea. The swivel function works fine and the height can be raised by spinning it around. Collection only from PL4 Greenbank.



32d