A Members' Posts
List Layout
Photo List Layout
Cards Layout
Free:
Combination Ladder (Belmont SL6)
Aluminium Combination Ladder Made up of four sections, permanently connected together, with locking hinges. Allows the ladder to be used in a number of different configurations. Fully folded (image 1), dimensions 123cm long, 69cm wide at base, 35cm wide in main section, 26cm thick. Fully extended (image 2) - reach of about 4m from ground As step ladder (image 3) - apex is 230cm from the ground As a platform (image 4) - 3000cm between feet, platform is 240cm long x 35cm wide Typical configurations as illustrated in one of the photos, NOTE... this image is NOT the same ladder, so is for illustrative purposes only. There is a small amount of surface corrosion on part of the hinges - but vary little, and nothing that compromises the structure or functionality. Two of the plastic feet are faded. The staging plates (when using it as a platform as seen in the illustration) are missing.



+3
+2
+1




+2
+1





+3
+2
+1


+1




+1



+2
+1


+1


+1



+2
+1



+1
Free:
Gas Brazing Torch (Belmont SL6)
Gifted
Gas Brazing Torch Taymar Auto Brazing Torch with igniter. For Propane/Butane mix gas. Cylinder is probably about half full. Trigger can sometimes be reluctant, but does work OK.



+4
+3
+2





2h
Free:
Class M Dust Extractor (Belmont SL6)
Expired
Class M Dust Extractor Bosch Professional GAS 35 M AFC Corded Dust Extractor Fair Chance Policy: I'll wait before choosing a recipient to give more people a chance to reply. This is an M Class extractor, suitable for working with softwood dust, but also fine dust from sanding oak or MDF. It is not suitable for use with hazardous materials like asbestos or silica. 240V mains powered 23 litre capacity Class M 12.4kg empty weight NOTE: This has the hose, but no other accessories are included. It is powerful, but also quite noisy, especially the filter cleaning feature which automatically bangs the filter to reduce clogging. This feature can be disabled. From the specs: • Automatic filter cleaning technology guarantees sustained, powerful suction for a very fast work progress • Certified M-class dust extractor in accordance to EU standards, for enhanced user protection • Powerful 1,380 watt suction turbine, with 254 mbars of high vacuum pressure, delivers the best extraction results


167d
Free:
Bike Carrier for Hatchback (Belmont SL6)
Gifted
Bike Carrier for Hatchback Can take 3 or 4 bikes - depending on size of bikes. It has been used with two adult and two children's bikes. Straps to tailgate of hatchback. I've attached an illustrative image of a similar carrier (but not the same!) attached to a car, So you can see how it works. This carrier is quite old, and used. It has been in the shed for a while, so shows some tarnishing of metal parts, and some stone chips in the coating. But it is still solid.




174d
Free:
Heavy duty workshop floor tiles (Belmont SL6)
Gifted
Heavy duty workshop floor tiles 30 qty DuraStudTM Solid PVC Floor Tile 50cm (Black) 1 qty Dura Edge Ramp 2 Pack (Black) Each tile is 50cm x 50cm 30 in all, covering 7.5 m2 2 edge ramps together are 1m long, so will fit a single door opening. These tiles are made of a very hard, black PVC They lock together like a jigsaw, to give a pimpled, very hard wearing surface, normally used in garages or workshops. They are new and unused. NOTE: they are heavy! This pile is 75kg.


198d
Free:
Steel Cabinet (Belmont SL6)
Gifted
Steel Cabinet 900 mm wide 450 mm deep 1005 mm high Single moveable shelf


221d
Free:
4in Engineers Vice (Belmont SL6)
Gifted
4in Engineers Vice

241d
Free:
2 Pieces 18mm Real Oak Veneered MDF (Belmont SL6)
Gifted
2 Pieces 18mm Real Oak Veneered MDF 2 Pieces Real oak veneer A & B sides in photos 18mm thick very solid Some marks, but will (gently) sand out. Piece 1 1100mm length (with grain) 1035mm width (across grain) 18mm thick Piece 2 620mm length (with grain) 1050mm width (across grain) 18mm thick




241d
Free:
External light fitting (Belmont SL6)
Expired
External light fitting 240V Lamp has permanently fitted LED illuminator - no bulb. New and boxed



248d
Free:
Recessed Downlight (Belmont SL6)
Gifted
Recessed Downlight Brushed steel finish Takes a 240V GU10 LED Bulb (not supplied) New and boxed.


252d
Free:
Record Power Dust Collector (Read full description!) (Belmont SL6)
Gifted
Record Power Dust Collector Model RDX600i 1000W (I think) HVLP collector No hose IMPORTANT NOTE 1 This is an HVLP (High Volume Low Pressure) collector using a 4in hose (not supplied). As such, it will not work well through a long, reduced diameter hose. Consequently, it is suitable for larger tools e.g. Planer Thicknesser, table saw, but is not really suitable for small, portable tools like sanders. IMPORTANT NOTE 2 This extractor has no official classification for its filtration capacity. This is ABSOLUTELY NOT an M Class or H Class extractor, so should not be used for applications producing fine dust e.g. sanding oak or similar hardwoods, or for hazardous materials like silica or asbestos.


255d
Free:
Aluminium Double Extension Ladder (Belmont SL6)
Gifted
Aluminium Double Extension Ladder 2 section aluminium ladder Folded dimensions 4250mm x 430mm x 160mm Folded or single section length 4.25m Fully extended length 7.45m - giving reach of approx. 7m Has quite a lot of blue paint at one end



314d
Free:
Carpet Threshold Strip (Belmont SL6)
Expired
Carpet Threshold Strip Door threshold strip, carpet one side, laminate or tiles on the other. Aluminium 900mm length New and unused.




1y
Free:
4 Loft Lids (Belmont SL6)
Gifted
4 Loft Lids Loft lids are used to cover downlights installed in the ceiling, sticking up into the loft. They make it safe to install glass fibre insulation over the downlights, allowing sufficient ventilation around the light to prevent overheating and reduce fire risk. 4 in total. New and unused.



1y
Free:
Steel Workshop Storage Cabinet (Belmont SL6)
Gifted
Steel Workshop Storage Cabinet Overall dimensions: width 92cm, height 107cm, depth 30cm 32 drawers total 8 Large - width 21cm, height 18cm, depth 29cm 6 Medium - width 28cm, height 8cm, depth 29cm 18 Small - width 14cm, height 8cm, depth 29cm All steel construction. Old, but good condition.



1y
Free:
Chubb Mortice Lock (Belmont SL6)
Expired
Chubb Mortice Lock 5 Lever Never used Includes 2 keys

1y
Free:
Toolbox (Belmont SL6)
Gifted
Toolbox L 49cm x W 23cm x D 22cm Old but still in good condition. Some remnants of plumbing products inside.




1y
Free:
Drill Stand and Drill (Belmont SL6)
Gifted
Drill Stand and Drill Robust. Mains power Bosch drill included. Inc chuck key.


1y
Free:
Router Dovetail Jig (Belmont SL6)
Gifted
Router Dovetail Jig Trend DJ300 Dovetail Jig Cuts 12.7mm half-blind dovetails or rebated dovetails in one operation. Clamps up to 300mm width. Old, but unused, and still a current model. Includes 15.8mm guide bush.



1y

1y
Free:
MaxxRaxx 4 bike carrier - tow bar mounted (Belmont SL6)
Gifted
MaxxRaxx 4 bike carrier - tow bar mounted Sturdy 4 bike carrier Mounts onto tow bar using bracket included. Includes all fittings, straps etc. Also includes number plate and light board with hangers and electrical connector. IMPORTANT NOTE Tow-bars vary between cars. This carrier requires a towbar where the tow-ball is built into a flange with two big bolt holes in it. The mount sticking out of the back of the car has two corresponding bolt holes. The tow-ball is bolted to the mount, using two big bolts, with the bracket for the carrier sandwiched between. The third image shows the bracket, and you can see the dark patch where the towball was fitted. This carrier DOES NOT clamp directly to the ball of the towbar as some carriers do, it uses the bracket. I believe you can get adapters to clamp onto the ball directly.




1y
Free:
IKEA 'Hol' Side Tables Pair (Belmont SL6)
Gifted
IKEA' Hol' Side Tables Pair Each is a box with removable lid. 50cm x 50cm x 50cm Perforated wood sides and top. Quite old, but re-sanded and in very good condition. Bare wood could be waxed, oiled or varnished.


1y
Free:
Tow Ball with bike carrier bracket (Belmont SL6)
Gifted
Tow Ball 90mm between bolt holes Rubber cover Bracket is for a bike carrier of some sort.

1y
Free:
Vax Blade 4 Cordless Vac (Belmont SL6)
Gifted
Vax Blade 4 Cordless Vac Includes: Powered carpet brush Powered small brush Single 18V battery Charger Various other accessories.

2y
Free:
Crock-Pot Slow Cooker (Belmont SL6)
Gifted
Crock-Pot Slow Cooker Used only occasionaly. Boxed, with instructions.
2y
Free:
Gate Hinges (Belmont SL6)
Gifted
Gate Hinges Plate 165mm x 48mm x 4.5mm 19mm pin probably M18 thread but can't confirm Hot dip galvanised New and unused
2y
Free:
Mamod Traction Engine (broken) (Belmont SL6)
Gifted
Mamod Traction Engine (broken) For those who are unfamiliar with this toy, it is a working steam traction engine, 26cm long and 17cm tall. It is powered by a burner using methylated spirits, generating steam, and powering a small cylinder to drive the main wheels. This specimen is approx 55 years old, and hasn't worked for 45 years after it fell off a shelf and broke the front wheels off (see second photo). It is also missing the drive belt which runs between the flywheel and driving wheel. As a consequence, it is certainly in need of some repair work, and may actually not work at all, or may proove unsafe. So... is there anyone out there with an enthusiasm for this sort of thing?
2y
Free:
Roof Bars VW Golf Mk6 (Belmont SL6)
Gifted
Roof Bars VW Golf Mk6 Pair of Thule roof bars for VW Golf Mk6 NOTE: These are thought to also fit VW Golf Mk5, but DO NOT fit VW Golf Mk7 or later. There will be a few other car makes and models that fit, but not many, and I don'f know which. They are not safe to use on a car unless you know they fit correctly.
2y